| RANDOM COLOR |
CLIPPER® is not only a lighter – it’s an eco-friendly, multi-purpose device.
It was the world’s first refillable gas lighter: CLIPPER® is made in Barcelona since 1972. It’s unique round shape and the special functions made it popular in over 80 countries.
CLIPPER® is a high tech quality lighter and it is customized with the highest printing quality. How to refill a CLIPPER® lighter Refilling is recommended with premium butane gas. Cans with plastic fill tip nozzles are not recommended as they may cause inconsistent ignition and performance. Always refill in an upside down position to avoid injecting air into the lighter. Shake the butane gas refill can a little, then press the stem of the refill can directly onto the red refill valve on the bottom of the CLIPPER® lighter.
Keep them in a straight position and let the gas go in for about 3-4 seconds. Repeat for a shorter period if needed. If you experience gas leakage while refilling the lighter, either you are not holding the lighter and gas can in a straight position or the stem of the gas can is not suitable for the lighter. How to change the flint of a CLIPPER® lighter Re-flinting a CLIPPER® lighter is easy: Pull the metal barrel out so you can get to the flint system. That’s the tube that contains the flint. Then carefully unscrew the little plastic base – using a small coin is recommended. Pull it out slowly as the spring can flick the flint accross the room! Remove the spring, and place your new flint in the tube. Carefully put sprung section back in, tighten and slide back into the lighter.